Your Guide on How to Replace Worn Out Radiators Before Putting Used Vehicles on the Market

You do not want to sell someone a lemon, do you? Therefore, you need to display caution by ensuring used cars Grants Pass Oregon Auto Dealership receive the necessary TLC, which include replacing a worn out radiator, before putting it up for sale.

Now that we are talking about radiators, did you know that researchers expected a 10-year increase in the life of both brass and copper radiators? The E-coat used is water-based, and the coating process is environmentally friendly. This is a sure indication that the installation of a brand new radiator is warranted due to the extra durability and long life prospects, which is a result of continuous improvement practices.

How to Replace Radiator Coolant, Cap, and Hoses?

Just follow this guide to replace the radiator and its accompanying components:

  1. Remove radiator cap and drain the coolant
  2. Be sure to drain the reservoir where applicable
  3. Check the car heater as it may also contain a drain plug
  4. Make use of fresh water as well as a radiator cleaner to flush your vehicle’s cooling system.
  5. Attach a garden hose to circulate fresh water through the unit under pressure.
  6. Ensure the radiator hoses are in good condition by squeezing them. If they are soft, then it is a sure sign they need to be replaced.
  7. Before replacing the coolant, ensure the drain plugs are all tightened. Also, set the heater temperature to the maximum heat position.
  8. Once the radiator is filled with coolant, turn the engine and allow it to warm up while the radiator cap is off.
  9. Turn off your vehicle’s engine and let it cool when the upper house of the radiator has warmed up
  10. Add more coolant until full
  11. Replace the worn out radiator cap with a new one.
  12. Start the engine again and allow it to warm up before inspecting the radiator for leaks on the heater core, engine block, or radiator reservoir.
  13. Responsibly dispose of the old coolant as it is poisonous.

As you may have noticed, radiators are among the most essential parts of an internal combustion engine cooling unit. It maintains the engine’s temperature and prevents it from overheating to help preserve your Grants Pass used car in good condition. They are the heart of your cooling system. Top brands come in different shapes and sizes, which would depend on the vehicle owner’s specific requirements and the amount of space available.

Radiator Types

You get the top flow and crossflow radiators. The former can be seen in older vehicles where hot fluid is taken in on top rows where it gets cooled down before it flows to the bottom. These radiators are much taller in size.

The cross-flow radiators are shorter in size and occupy far less space once it’s under the engine hood. Therefore, the latter design is much more appropriate for use due to space constraints in modern vehicles. The coolant in these radiators would be pushed right into the radiator at one end and used across the radiator where it would run through a lot of cooling tubes for optimum efficiency. This way you can be sure the used truck buyer in Oregon will be happy with their purchase.

Flushing your radiator is a procedure that should not be neglected in any way.

How Would You Flush an Automobile Radiator

An essential function of a radiator is to cool the engine by circulation either an antifreeze agent or water through the pipes. This is why it is recommended you flush your radiator every six months for maximum efficiency.

Following are some guidelines in this regard:

  • Park your vehicle on a level surface, then switch off the engine to allow it to cool right down
  • Pop the hood open to remove the radiator cap and the drain holes towards the bottom part of the radiator so the coolant can be drained.
  • Detach both the upper and lower radiator hoses. If they are not in great shape, replace these.
  • Check the water that is in the drain pan for contaminants. If you detect any signs of rust or black substances, then you need to flush your radiator.
  • Make use of a garden hose if possible to spray the water into the radiator and clear it from any impurities.
  • Replace your drain hole cap and fill with new coolant that is line with your the vehicle’s specifications.
  • Finally, check the radiator cap for any signs of rust or if it is worn out.
  • Start the engine and leave it running for a bit to ensure the cooling system is operating correctly.

If unsure about anything to do with your automobile radiator, speak to your local radiator experts so they can provide the best advice and handle the radiator replacement from a used car dealership.